MERBOLIN / Water Based Primers / Merbolin Interior Putty

Merbolin Interior Putty

  • Description
  • Generic Details
  • Video
  • PDF

Mode of Packing 20 kg
Definition It is an P.V.A. emulsion resin modified, water based interior putty.
Color White
Uses of... It can be safely used to take smooth surface on interior wall of concrete, plaster, mineral substrate etc.. filling of cracks and holes
Specifications It is water based, odourless, ready to use and can be applied easily. It forms sound surface and saves paint consumption. It resists water and moisture.
Technical Features

Type of Resin : Homopolymer
Viscosity (KU)(25 °C) : > 142
Specific Gravity (g/ml) (20 °C) : 1.76 ± 0.05
Solid Content (by weight) (%) : 74 ± 2
pH : 8.00 - 9.00
Practical Coverage : 0.6 - 2.0 m²/kg (depending on the conditions of the surface )
Recommended number of coats : 1 - 2 coats (depending the conditions of the surface )
Drying Time (20 °C) : Drying: 3 - 5 hours To sandpaper: 8 - 10 hours
Thin Down Ratio : Ready to use , don’t thin.

Application 1 All application surfaces must be sound, dry and clean Old painted, blistered and dirty surface must be cleaned by scratching. Merboizolan Insulation Primer should be applied on absorbent and dusty surface.
Application 2 After the preparation of surface, Merbolin Interior Putty is applied as 1 or 2 coats on the surface with spatula or any putty application tools, by waiting 3 - 5 hours between the coats.
Storage Conditions It should be storaged in original and closed containers at 5 - 35 °C temperatures. It should be protected from extreme heat, moisture and frost.
Important Notices

Putty must be mixed before the use.
The ambient temperature should be between 5 - 35 °C at the time of application.
Application tools must be cleaned with water, after the application.
After the application, the puttied surface must be protected during 24 hours, from chemical and physical factors.
Putty doesn’t empty into drains.
Application procedures defined above should be strictly observed.


H317 Causes allergic skin reactions.

P101 Keep the package and the label if you need medical advice.
P102  Keep out of reach of children
P103  Read the label before using. 
P261 Avoid breathing dust, vapor, mist, gas, smoke, spray.
P280  Use protective gloves/protective clothing/glasses/mask. 
P321  Special medical response required (see label) 
P363 Wash contaminated clothing before reuse.
P333+P313 In case of irritated/itchy skin: Seek medical help/advice.
P501 Dispose of the content/container in accordance with local/regional/national/international legislations.

Name product : Merbolin Interior Putty