Water based semi-glossy decorative and aesthetic interior surface finishing paint that gives a marble effect.
AREAS OF USE
All previously painted surfaces that are prepared, interior surfaces of concrete, plaster, black cast, betopan, glass textile and wall paper.
TECHNICAL PROPERTIES
Concentration: 1,65±0,02 g/ml
APPLICATION
The application surface must be smooth, solid, dry, clean and of the quality that would accommodate the paint. The coatings on previously painted, glass textile, or wall paper covered surfaces must be removed, if possible, and a smooth and even surface must be obtained by applying Bianca interior surface paste. After the paste applied surface is sanded, Bianca Vals Water Based Sateen primer must be applied to complete the surface preparation process. Due to its weak and chalking quality, sateen plaster should never be used on the surface.
On the surface that is prepared as indicated above, Bianca Artistico Marmorino must be applied by using a trowel in a single layer by spreading the product without dilution in the consistency of a paste. Before the surface is completely dry, a second layer of application is made with the help of a trowel. The surface is smoothed out by circular motion applied through the sides moving from outside towards inside. After the surface dries, the third layer must be applied with a spatula in a patch pattern. Immediately following the application, and before the product is dry, the polishing process must be started with the help of a trowel. Application must be made with care without applying too much pressure on the surface. If too much pressure is applied on the surface, it will appear as if the surface is scratched. After the polishing process is completed, the surface must be allowed to dry for 24 hours.