This is a solvent-based paint remover that enables all kinds of paint to be removed after softening and blistering.
Surface Preparation&Application
The application surface should be first sanded with 80 grade sandpaper. This facilitates the penetration of the remover into the paint and thus the removal process. The remover should be applied as thick coats. Due to its volatile characteristic, it is recommended to sand the surface with sandpaper after the application. And after 10-15 minutes, the paint blisters are removed with the help of a spatula. Finally, the surfaces should be cleaned with Cellulosic Thinner.
Thinning / Blending Ratio
Ready to use.
Coverage Area
Varies depending on the type of the coating material on the surfaces.
Recommended Application Tools
Brush.
Package
0.75 L.