DESCRIPTION: Acrylic Copolymer binder based, exterior putty.
CHARACTERISTIC:
-Resistant against outside conditions with its special structure.
-Cover plaster faults and easily appliable.
-Minimum consumption, breathing ability, dry in short time.
-Due to its streching ability, it covers the cracks and prevents them from reaching the finishing coat.
APPLICATION SURFACES:
Can be applied on surfaces such as conventional plaster ,concrete , asbestos plate ,gas concrete and similar.
TECHNICAL INFORMATION:
Structure : Stirene acrylic.
Consumption :500 – 1500 gr/m² depending on surface.
Thinning Ratio : No thinning, ready-to-use.
Application tools : Trowel , spatula.
Drying : After 1 – 4 hours depending on weather conditions.
Ph : 8 – 9
Density : 1,88 ± 0,05 ( g / ml )
Amount of solid : ( 73 ± 5 ) %
Thickness of dry coat: ( 350 ± 50 ) micron
Thickness of wet coat: ( 650 ± 50 ) micron
APPLICATION:
-It should be applied without diluting on old and new surfaces.
-For concrete surfaces, Acrylic Putty is mixed with 20% cement to form a smooth and solid surface.
– Ambient and surface temperature should be between + 5ºC and + 30ºC during the application and product drying.
CAUTION:
S2: Keep out of the reach of children.
S24 / 25: Avoid contact with eyes and skin.
S46: If swallowed, seek medical advice immediately; Show the container or label.
Store the product in a tightly closed container.
Do not pour into the sewer.
STORAGE: Keep at a cool and clean place away from sun light. İt can be stored unopened 1 year at room temperature.
PACKAGING: 25 Kg 5 Kg PE Bucket
Poz No: Y.25.004/13