DESCRIPTION: Acrylic copolymer binder-based, water based, matt outward looks, silicone additives, first class, interior final coat paint.
CHARACTERISTIC: -Healthy and environmental friendly -Breathable -Easily appliable and leaves no remains. -High covering ability. -Easy cleanable through silicone -Silk-matt outward look, colourfast for years.
APPLICATION: After surface preparation, Platinum Interior Paint With Silicone can be applied on a wide range of interior surfaces such as old painted surfaces, concrete, plaster, rendering, cement board, wallpaper, glass textile etc.
TECHNICAL INFORMATION:
Content: Styrene Acrylic
Consumption: Single coat: 13- 17 (m²/ lt), 85-130 (gr/m²)
Thinner: Water
Thinning Ratio: %10-15
Drying: Touch Dry: after 15-20 min, Dust repulsive: after 1 hour, Hard dry: after 24 hours
Viscosity: 125 KU ± 10 ( 23 º C )
pH: 8 – 9 (25 º C)
Density: 1,56 ± 0,02 (gr / ml)
Solids Content: %67±2
Thickness of dry coat: ( 30 ± 5 ) micron
Thickness of wet coat: ( 60 ± 5 ) micron
SURFACE PREPARATION: – The surface must be cleaned of any oil, dirt or dust. Swollen and old paintings must be scraped off. The surface must be clean, dry and solid. -Hollows and cracks should be filled with Interior Acrylic Putty in case of necessity.-After priming the surface with the appropriate primer, paint can be applied.
APPLICATION: -The paint should be thinned 10-15% with clean water and applied with roller, brush or spraying in two coats. -Leave 2 hours between coats depending on weather conditions.-After application tools should be cleaned with water.
APPLICATION DETAILS:-On new painted surfaces, make Sure that Surface has waited about 28 days before application. -Paint should be completely mixed so that it is homogenous. -Ambient and surface temperature should be between +5 and +35 degrees during the application and product drying season. -Gloss and glasslike Surfaces should be rubbed before application to obtain better adhesive and a healthy surface.
CAUTION: – S2: Keep out of the reach of children. – S24/25: Avoid getting eye and skin contact. In case wash with plenty of water. – S46: If swallowed, seek medical advice immediately and show this container or label. – Preserve in a tightly closed container. – Do not dump into the sewer system.
STORAGE: Keep at a cool and clean place away from sun light. It can be stored unopened 2 year at room temperature.
PACKAGING: 15 lt, 7,5 lt, 2,5 lt PE Bucket