MERBOLIN / Water Based Primers / Merbolin Anti-Water

Merbolin Anti-Water

  • Description
  • Generic Details
  • Video
  • PDF

Mode of Packing 1 kg, 3 kg, 10 kg and 20 kg
Definition It is an acrylic copolymer resin based, waterproofing coating.
Color White
Uses of... It can be safely used on surface of roof, terrace, ground and basement walls for water isolation and impermeability.
Specifications It doesn’t include solvent and asphalt, which is an environment friendly and water based isolation material. Furthermore, due to the elastomeric structure, it adheres to surface well and no cracks. It can be applied horizantel and vertical coats on surface of plaster, concrete, brick etc...
Technical Features

Type of Resin : Acrylic copolymer
Viscosity (KU)(25 °C) : 134 ± 3
Specific Gravity (g/ml) (20 °C) : 1.42 ± 0.03
Solid Content (by weight) (%) : 66 ± 2
Glossy ( 85° - Gloss ) : 7 ± 3 ( mat )
pH : 8.00 - 9.00
Practical Coverage : 0.6 kg /m² (two coats application on vertical surface) 1.5 kg /m² (three coats application on horizontal surface)
Recommended number of coats : 2 or 3 coats.
Drying Time (20 °C) : Touch drying: 1 - 2 hours, Drying: 3 - 4 hours
Thin Down Ratio : For primer coat: Thinned with 40% water.              For other coats: Used directly, doesn’t thin

Application 1 All application surfaces must be sound, dry and clean Old and blistered layers on surface must be cleaned by scratching
Application 2 Merbolin Anti - Water is thinned with 40% water, stirred well and should be applied with brush or roller for primer coat. Depending on the weather temperature and allowing 12 - 24 hours between the coats, it should be applied two or three coats. Each layer should be applied on the surface in reverce direction
Storage Conditions It should be storaged in original and closed containers at 5 - 35 °C temperatures. It should be protected from extreme heat, moisture and frost.
Important Notices

Waterproofing coating must be mixed before the use.
The ambient temperature should be between 5 - 35 °C at the time of application
Application tools must be cleaned with water, after the application,.
After the application, the coated surface must be protected during
3 days, from chemical and physical factors.
Waterproofing coating doesn’t empty into drains.
Application procedures defined above should be strictly observed


H317 Causes allergic skin reactions.

P101 Keep the package and the label if you need medical advice.
P102  Keep out of reach of children
P103  Read the label before using. 
P261 Avoid breathing dust, vapor, mist, gas, smoke, spray.
P280  Use protective gloves/protective clothing/glasses/mask. 
P321  Special medical response required (see label) 
P363 Wash contaminated clothing before reuse.
P333+P313 In case of irritated/itchy skin: Seek medical help/advice.
P501 Dispose of the content/container in accordance with local/regional/national/international legislations.

Name product : Merbolin Anti-Water