AREAS OF USE
Applicable as a protective and decorative paint on interior and exterior surfaces of building elements such as gypsum plaster, gypsum board, plaster, concrete, brick, iron construction, wood, etc.

 

SPECIFICATION
• Resistant to friction and washing enabling high quality performance.
• Time and labour saving bound to its high spreading power during the application.
• Complete fitness with the applied surface; no cracking, no blistering no-spilling.
• Non-faded due to its qualified pigment structure, with deep white and excellent covering capacity.
• Gives semi-gloss and smooth appearance to the surfaces with its care fully selected color sand super quality.

 

APPLICATION
A) Uncoated Surfaces: Dirt and dust on surfaces to be painted should be removed and treated with Synthetic Paste or satin gypsum. Painting of wet surfaces should be strictly avoided. Defects on the surface should be eliminated using an appropriate putty. Never start with next step sunless the putty is set and emerised. Apply a very thin coat of Bianca Synthetic Primer in order to avoid over-consumption of paint and steeping of gypsum powder on surfaces treated with satin gypsum. Then Apply two coats of Bianca Synthetic Semi-Gloss Paint.
B) Surfaces to be Re-painted: Swollen or loose paint should be removed and the entire surface should be properly emerised. Apply putty locally to eliminate any unevenness. Ensure that the surface to be painted is completely dry. Apply one coat of Bianca Anti-Rust Primer on metal surfaces and one coat of Synthetic Paste on wooden surfaces depending on the surface conditions. It is recommended to apply a thin coat of Bianca Synthetic Primer if type of the previous paint is unknown.

Allow for at least 12 hours to apply the top coat. After that apply two coats of Bianca Synthetic Semi-Gloss Paint.  Wait for 24 hours between coats. It can be applied either with brush or roller at min. +5ºC, max.+30ºC temperature.

Renk Kataloğu ( PDF )