This is a water-based, polyvinyl acetate carcass glue used in gluing all kinds of wooden materials such as wood, coating, Formica and chipboard.
Surface Preparation&Application
The surfaces that will be glued should be cleaned from dust, dirt and oil. The glue should be applied to the surface after mixing thoroughly, and pressed. For a good result, the temperature should be above +15°C.
Thinning / Blending Ratio
Ready to use.
Coverage Area
Varies based on the application surface.
Drying Time
At 20°C and 50% relative humidity, the glue fully-dries in 0.5 to 2 hours.
Recommended Application Tools
Brush and roller.
Package
3 kg - 10 kg - 20 kg - 200 kg