This is a solvent-based, transparent, silicon formula oil combination that prolongs the life span of the teak and similar hard woods used in boats by protecting them against water, seawater and sun light through impregnation.
Surface Preparation&Application
For first-time teak oil WDR use, the surface should be dry, sanded and clean. It should be applied as 2-3 coats. It is recommended to wait for 24 hours between coats for best results. To ensure that the wood has a long life, it is recommended to apply the produce once in every 2-3 months and in case of long time exposure to seawater and sun. Before application, Teak WDR should be stirred thoroughly and this process should be repeated from time to time during application.
Thinning / Blending Ratio
Used without thinning.
Coverage Area
Varies based on the absorbing power of the surface and application method.
Drying Time
At 23°C, the oil dries in 1 hour.
Recommended Application Tools
Roller, brush and sponge.
Package
0.75 L - 2.5 L