This is a watertight, water and moisture resistant, cement-based adhesive mortar that is reinforced by polymers to be applied on interior, exterior horizontal and vertical surfaces of the buildings to glue the EPS, Neopor, XPS and Stone Wool thermal insulation panels.
Preparation
The powder inside the 25 kg package should be mixed with 6 – 6.5 L water inside a clean container with a slow-cycle electric drill until the mixture has a homogenous texture. The prepared mixture should be mixed once again after waiting for 5 minutes and prepared for application.
Adhesion Strength (28 days) (N/mm²)
1 N/mm²
Applicable Thickness
Min. 3 mm - max. 20 mm.
Water Amount (For 25 kg dry mortar)
6.0 L – 6.5 L
Drying Time
12 - 24 hours
Recommended Application Tools
Steel trowel
Package
25 kg kraft bag