It is a single-component resin-based insulation paint, containing solvents and reinforced with special polymers to prevent moisture and humidity-related issues on the interior and exterior walls of buildings. It creates a protective layer against moisture and humidity on the surfaces it is applied to.
Surface Preparation&Application
The Prof P-MP humidity paint is ready to use. No priming required. Before the application, formations in the form of darkening on the surfaces should be cleaned with bleach. Old painted and swollen surfaces must be cleaned until a solid surface is obtained and the surface must be free from dust. The required areas must be repaired with EXELANS REPAIR MORTAR. PROF P-MP moisture ink is ready to use and should be used by opening the lid and mixing for 3 minutes. After the mixing process is completed, the current surface should be applied with a brush, a suitable sprayer or especially a synthetic epoxy roller without thinning the product. The PROF P-MP moisture paint must be applied in 2 layers and at least 24 hours must be left between layers. Application areas should be well ventilated.
Usage Areas
Indoors and outdoors, on gypsum plaster, painted or unpainted surfaces, basement walls, surfaces with moisture and humidity problems, slightly wet and humid surfaces, surfaces where salt efflorescence occurs.
Consumption
500-600 gr/m² for 2 layers of application.
Drying Time
3 hour
Recommended Application Tools
Brush, roller.
Package
1-5 kg metal bucket