This is a water-based, semi-matt wood protector resistant to sun rays.
Surface Preparation&Application
The wood should be fully cleaned from oil stains, dusts, old paints and varnish residues. After the surfaces are wiped with cellulosic thinner, it should be applied in 2 coats after waiting 4 hours between each coat.
Thinning / Blending Ratio
Thin with water by 5%.
Coverage Area
Approximately 12 m²/L for single coat depending on the absorbance of the wood.
Drying Time
Touch dry in 20-30 minutes and fully dry in 3-4 hours.
Recommended Application Tools
Brush and roller.
Package
2.5 L - 15 L