This is a water-based, polyvinyl acetate emulsion glue used in gluing materials such as wood, MDF, coating, Formica and chipboard.
Surface Preparation&Application
The surfaces that will be glued should be cleaned from dust, dirt and oil. The new wooden surfaces should be saturated with 1 coat of Politex Water-based Semi-matt. After the glue is mixed thoroughly, it should be applied on one of the surfaces by covering the entire area, waited for few minutes to be absorbed and then pressed to the other surface. For a good result, the temperature should be above +15°C.
Thinning / Blending Ratio
Ready to use.
Coverage Area
4-7 m²/kg based on application surface.
Drying Time
At 20°C and 50% relative humidity, the glue fully-dries in 0.5 to 2 hours.
Recommended Application Tools
Brush and roller.
Package
0.7 kg - 3 kg - 17.5 kg