This is a water-repellent, cement-based, double-component, flexible water insulation mortar reinforced with special polymers that is used to insulate garages, terraces and basements and to protect the surfaces from the corruptive effects of moisture and humidity by being applied with brush. Suitable only for positive pressure side.
Preparation
The liquid component should be shaken well before application and poured into a clean application container. The power component should be added to this container and mixed with a slow cycle mixer until a homogenous mixture is obtained. The mixture should be mixed again after waiting for approximately 5 minutes.
Adhesion Strength (28 days) (N/mm²)
1.50 N/mm²
Drying Time
Min. 1.0 mm - max. 2.0 mm
Drying Time
12 - 24 hours
Recommended Application Tools
Block brush
Package
20 kg powder + 10 kg liquid