This is a water-repellent, cement-based, double-component, semi-flexible water insulation mortar reinforced with special polymers that is used in the water insulation of garages, terraces and basements by being applied with brush. Suitable only for positive pressure side.
Preparation
The liquid component should be shaken well before application and poured into a clean application container. The power component should be added to this container and mixed with a slow cycle mixer until a homogenous mixture is obtained. The mixture should be mixed again after waiting for approximately 5 minutes.
Adhesion Strength (28 days) (N/mm²)
1.50 N/mm²
Applicable Thickness
Min. 1.0 mm - max. 2.0 mm
Drying Time
12 - 24 hours
Recommended Application Tools
Block brush
Package
20 kg powder + 5 kg liquid